Leave a Review For: Panici Bruce


(608) 868-2889


411 W High St,
Milton, WI 53563

View On Google Maps

Found on Facebook

Panici’s Power Sports Zone, Milton, WI. 186 likes | 9 talking about this | 1 was here. At Panici’s, we have been riding and racing for over 25 years. We. .

This 2013 Polaris Sportsman 800 has been ridden hard, there will be a lot of work for me on this one. The parts list is growing, if your going to ride in muddy/sandy conditions make sure you clean and lube your unit every time you come back from your muddy adventure !

The wheel bearings are filled with dirt and sand, the grease has been long gone !

I spent the good part of the morning cleaning this unit up before I could see what was damaged !

I dug into this 2013 Polaris Sportsman 800 again today, this unit is in bad shape ! The drive train has been compromised do to submerging this unit in very deep,muddy, sandy water filled with weeds and other small vegetation.

Another classic showed up today, this is a 1966 Honda CB 160. I really like working on the old ones !

This 1998 Softail Deuce showed up today for service, we are having a problem with our charging system.

This Bassani exhaust system is going on a 2001 Sportster 883, the quality of this product is second to none !

The sandy muddy water has been everywhere, the brakes need to be cleaned, lubricated as well as new pads. These clutches have been contaminated with water that’s filled with sand and mud, they both need to be replaced.

These Polaris 800’s have huge amounts of torque, you can tell this unit is pushed to its limits when the cotter pins have been rolled over to the point where you have to work really hard to get them out !

I dug into this 2013 Polaris Sportsman 800 today, this unit has been rode hard and literally put away wet ! The water, mud, weeds and sand have ruined a lot of parts on this ATV. If your going to ride through deep, muddy sandy waters make sure you keep your unit cleaned and greased !

This 2004 Artic Cat 500 is done and ready for pick up tomorrow. Thanks for the biz Todd !

A couple of great customers of mine are loaded up and headed to Sturgis 2015, have fun you guys I wish I was going with !

Honda CL 175 Scrambler, thanks for the biz Chris !

I picked up a lot of parts yesterday after I closed shop, I needed to get this lil 1976 Honda CL 175 back out on the road. This units fuel valve needed to be unplugged as well as all new gaskets and O-Rings. This is a classic for sure !

Electra Glide, this is a nice bike. Thanks for the biz Jason !

This 2009 Electra Glide came in with some clutch problems, this unit now has a High Performance clutch kit from Drag Specialties to get the power to the ground !

This 2009 Electra Glide is ready for pick up tomorrow, I will test ride this unit before it’s picked up. Thanks for the biz Jason ! Stay tuned for the ride, my Go Pro is ready to go !

After installing a new drain plug O-Ring on the drain plugged I pulled out my Snap-On torque wrench, after a couple of test runs in the parking lot I will have this new High Performance clutch dialed in !

Clutch hub all buttoned up, time to get this clutch adjusted. I will close up the Primary, fill it with Primary Fluid and take my time adjusting this clutch !

My father is a tirelessly hard-worker who puts his heart into his craft. You can expect nothing less than the very best work at Panici’s Power Sports Zone!

Bruce has truly made his passion his business!.

Please Leave a Review for Panici Bruce

Your email address will not be published. Required fields are marked *

Filed under General Listing, Motorcycle Dealers, Motorcycles & Motor Scooters-Parts & Supplies