Sometimes it is not necessary to remove the existing cabinets /appliances because they are in acceptable condition. Yet the flooring still needs to be replaced. As noted earlier, if you are installing thin flooring, such as luxury vinyl, laminate, or tile, it is possible to lay the flooring right up to the cabinets.
Hickory is a durable, long-lasting wood perfect for kitchen cabinets, but it can be dark and foreboding-looking. If you want to lighten up your kitchen by painting the cabinets white, the process takes a bit of time.
Cabinet spray painting Hickory has a lower upfront cost than most other updating options available in the market. However, it is one of the least efficient ones too. Before you can spray paint your cabinets, their wooden surfaces must undergo thorough sanding and cleaning.
Sand the cabinet exteriors, as well as the doors, with a medium- to fine-grit sanding block to scuff up the finish; this results in a more grippable surface for the primer. Do the same for the interior of the cabinets and the shelves, if you wish to paint the interior surfaces. Wipe the dust away
Don’t Go Overboard on Sanding You should sand cabinets before beginning your how to paint kitchen cabinet project to give the new paint a good surface to grip. But you don’t need to sand to bare wood. If your cabinets have a factory finish, sand lightly with 120-grit sandpaper or a sanding sponge.
Custom cabinets made out of 3/4 inch plywood are absolutely better, but you will pay 4-5 times or more than IKEA cabinets. Many of my clients with IKEA kitchen cabinets use a quartz or granite countertop and have had no problem with their countertop.
How to Refinish Maple Kitchen Cabinets. Maple is not at all difficult to refinish because it takes well to sanding, and staining or painting. Stripping the old stain is not necessary if it is in good condition and you only want to darken or refresh it with the same color.
First, carefully pry the tile running up the backsplash away from the wall. When the tile is removed, go under the counter and use a screwdriver to take off the brackets holding the countertop to the base cabinets. Lift the countertop off. Some tile countertops have an underlying layer of wood.
Laminate Removal The cement must be heated to remove the laminate from the cabinets. Use a heat gun to loosen the cement and gently pull the laminate from the face of the cabinet. While the cement is still pliable, scrape the cement from the surface of the cabinet with a wide putty knife.